Dm5 problem, HELP!!!

[EdibleRanger]

lincoln

 

[EdibleRanger]

You reckon that an accidental reversal of the polarity would have burned something out?

 

[Ash - GI Sportz]

Hi

Check that you have not damaged the battery cable in any way.
Check that the chip is fitted the right way around (the notch on the chip matches the notch on the chip carrier)
Are you using a stock chip?
Try unplugging the eyes, the solenoid and the membrane pad and hard start the board the way you tried before.

Contact me if you have tried all this and are still no closer to a solution - eurotech@dyeprecision.com

Thanks

Ash Chaplen
DYE Europe

 

[Cliff-In2Deep]

You reckon that an accidental reversal of the polarity would have burned something out?

Shouldn't have as I've accidentally put the battery in the wrong way, it just didn't turn on...

 

[deadbox]

Sounds like a new battery harness is in order. Might be worth putting a post in the wanted section.

 

[EdibleRanger]

Sounds like a stupid question, but whats the solenoid?

im a n00b when it comes to e markers, or most markers infact

 

[EdibleRanger]

found the solenoid

 

[EdibleRanger]

After removing the eyes, solenoid, and the membrane and hard starting the marker (without any luck), i plugged everything back in and the marker miraculously turned on!

However, it's now blinking a blue light at me, tried several new batteries with the same outcome, any ideas, is the gun trying to cycle?

 

[Scars]

im almost sure that flashing blue means eyes on no ball, (not had a DM for a while) this is normal....put your finger in the breech and see if it goes solid blue

find the manual and it will tell you what each colour means

 

[Lump]

http://www.dyematrix.com/manuals/DM5_Manual.pdf