DM trigger pin removal

[Lump]

ok stuck trying to get the trigger pin out of a DM5 body have looked on the nation got the frame the right way up and smashing the crap out of it, and it aint budging

any suggestion ?

 

[sumo89]

bigger hammer?

 

[CAMDENELECTRIC]

Hammer, Chisel or f**k arse stick of dynamite!

 

[Dskize]

heat ,lube ,a nail with the point groud off and a mash hammer

You should have all that in your fetish room mate ...

 

[Lump]

FOR FCUK SAKE ok got it out half way beating the shti out of it so now in the freezer for half an hour, never know a trigger like this

 

[Lump]

any one fancy a try ?

 

[sumo89]

put it in a clamp and use pliers from the other side?

 

[evoonline]

whats wrong with the trigger fitted? if it aint broke then dunt fix it ...

 

[Lump]

stock trigger to heavy and wont pass a bounce test

no vice, smashed the crap out of it and cant shift it passed half way out

 

[Dark Stranger]

How is the frame being held?

Needs to be at least on a hard surface and ideally in a vice. If you are not already also use a metal hammer rather than a rubber mallet as with both you get a much more forcefull 'shock' to the pin.

If you get really desperate then this stuff is the nuts!

http://www.properautocare.com/wurrosoffex.html