Crossfire Preset 2 Burst Discs?

[PaintballBudgie]

I have a Crossfire Low pressure preset.

Had about 4000psi in it and was watching tv in bed last night when WHOOOOOSH! (That was the air not me.)

Burst disc had gone.

I notice I have 2 on there. One says M7K the other 1800.

The 1800 has gone, is this a 7k one for the tank to ensure it doesn't over fill and an 1800 one for some other reason.

Anyone know where I can get the crossfire all in one burst disc nut things marked 1800?

 

[robtattoo]

Fat Bob's paintball (01757) 705327

Giz a ring, we do them for £4.50

The 1800 psi jobbie is for the low pressure (output) side of the reg. Loads of both in stock matey.

 

[manike]

Originally posted by PaintballBudgie
I have a Crossfire Low pressure preset.

Had about 4000psi in it and was watching tv in bed last night when WHOOOOOSH! (That was the air not me.)

Burst disc had gone.

I notice I have 2 on there. One says M7K the other 1800.

The 1800 has gone, is this a 7k one for the tank to ensure it doesn't over fill and an 1800 one for some other reason.

Anyone know where I can get the crossfire all in one burst disc nut things marked 1800?

You have a low pressure birst disc (1800) to control the output and make sure you never put too much pressure into the gun. Then you have a HP burst disk to prevent you over filling the tank (7K)

You MUST replace this LP burst disc with another low pressure burst disc.

It's unusual for that disc to go... it may mean you have some dirt in the main reg seal... and need to get the reg serviced.

Once you replace the LP burst disc keep an eye on it when it's on your gun and watch for the down line pressure to creap.

 

[PaintballBudgie]

Cheers, have ordered a couple of both sizes.

Has never been a problem and has had aair in it unused for about 2 months. Gased up a marker and degassed it. 3 hours later whoosh.