Cocker Questions...

[Andymi86]

Cool. I looked at the black magic, and that is a fine marker. I compared the black magic, and the mini black magic on worr's site (thx phillip) and the only difference is like maybe a half-inch in the front block, and 3oz. Right now I have a Black Dragun, and with these questions, I just want to see what I might be looking at in the future. So far, an autococker looks nice, and I've compared the e-blade and race triggers, and the both look awesome. Not sure which looks better (or more practical) yet. Also, what is the performance difference of say an 03 vert feed, and a black magic. And what would I have to change to make the vert perform like black magic (If it even can =-]) Thanks again for all of the help. Keep it comin'!

-Andy

 

[Micah]

performance between the 03 vert feed and the BM should be about the same with the BM looking much nicer. You should notice no difference once you throw an electro kit onto it.

I did my research (warning: partially biased opnion coming) and desided that the EBlade was the Kit for me. It's lighter, shoots just as fast (if not faster, but who can REALLY pull the trigger 18times a second?) both have "classic mode" where the bolt stays back when you hold the trigger back. The Eye costs another $50 with the race, where as it comes with the EBlade for free, so I ended paying $200 less than I would have for a similar Race setup. I prefer the trigger on the EBlade to the one on the Race. Race uses a microswitch versus the Optical sensor in the eblade, the Eblade uses an adjustable magnet for trigger return where as with the race you need to play with springs. The trigger is Infinatly adjustable EXTERNALLY on the EBlade. All the Eblade techs speak english as their first language well ... ENGLAND-ish anyway I have found the EBLADE to be WAY TOO easy to shoot insainly fast, and I don't usually shoot anything fast.

... Ok, I'll stop now. Remember, this was what I researched, so this is what I used to form MY opinion. Some of my opnions have also been formed after playing with the thing 3 times and putting like 7k paintballs through it and Firing it approximatly 60k+ times (I've killed 3 batteries that were half gone when I put them in)

-Micah (Planet really should hire me )

 

[TOPOR]

If you use your minicocker with a Gaz through grip (Voodoo fore grip or even better Magnus custom front grip because it has a larger volume inside... ) and a Max Flow. Then the front grip you use (instead of a secondary reg) will act as an extension of your air chamber.

You should end in fact with such a set up with a more than needed air chamber!

I got my Voodoo fore grip drilled in by a machinist to enlarge it inside and lighten it cause it was more a full bar of aluminiumm with a hole inside rather than a tube!!!

That was my 2 cents of today