Cocker 3-way timing rod problems!!

[Headshot Apoc]

Ok just installed an Angry 3-way with WGP hinge trigger (Thanks Simmo) Its all running very sweet with a nice short 2-3mm trigger pull, But............

If I tip the marker to the right the timing rod falls to the side and I get a gas leak from the 3-way!

Does anyone make an ASA with a screw to take up the slack?

Cheers

 

[Collier]

Try Eclipse, I know they drill and tap a set screw into the Eclipse cocker, you might be able to get it done there, or you could do it yourself/take it to a machinist to do!

Paul.

 

[rayko]

Belsales do them too, not too expensive either

Ask Dangerous Brian...

 

[Parksy]

I had the same problem with my STO cocker. I sent it to jack @ planet and he put a set screw (the same as on Eclipse cockers) through the asa mount for £15. Solved the problem straight away.

What I did temprarily was to put an o ring on the part coming out the other side of the frame to hold it in place, not pretty but it will work until you can get the frm mod done

Dave

 

[Headshot Apoc]

Cheers for quick replys guys