choppining paint in LCD
- Thread starter Dunerat
- Start date
breaking in the chamber or as you said on the bolt.Originally posted by L1f3
Dwell should be fine at 14 with decent paint
Never reduced my LPR pressure Phillip? When the LPR did drop (to about 80) on my IR3 it just caused drop off under rapid fireI would say if it is on or around the 90/95 mark then leave it be...
Could check to see if the balls are feeding properly into the marker. Pop 2 in the feedneck. Fire the first one and make sure the second drops into the breach properly and doesn't either jump out the neck, or bobble around in the neck
Are the balls breaking in the barrel or on the actual bolt?
there are brand new batteries in the hopper, dont know about the marker though but the do hold a charge for about 350 000 shots though
Ah, but that may just show the normal ball bobble like in just about every marker....try 1 in the breech and a piece of cardboard(like cereal box) on top of the feed tube.....do not use tissue....its too light and will always move
Angel Chopping
Hello mate if its any use I`m an Angel tech and live in Bristol if you can get the marker up to me I`m sure I can help .,had a similar problem with mine ,all it neede was a good service and the bolt and ram setting up.
Q has my mobile no. if you want some help
Cheers Darren
Hello mate if its any use I`m an Angel tech and live in Bristol if you can get the marker up to me I`m sure I can help .,had a similar problem with mine ,all it neede was a good service and the bolt and ram setting up.
Q has my mobile no. if you want some help
Cheers Darren
tried that and the second one has tendancy to hop up.Originally posted by L1f3
Try the 2 ball in the neck thing, fire one, see if the second does anything
Dave
what does that mean?
hiya toma
Nope the car hasnt fallen apart yet although that would be nice.
There is nothing trapped in the face and its not damaged checked everything from small little metal pieces sticking out to cuts in it nothing.