Calling all XSV ego owners
- Thread starter Rupe
- Start date
if its 06 set trigger then set debounce so it doesnt bounce
if 05 set trigger to preference
start them at band 75% tol 10% and work from there
hope this helps
settings work for most egos though the later boards v1.06/1.08 the filtering is a bit better i beleive
someone will correct me
if 05 set trigger to preference
start them at band 75% tol 10% and work from there
hope this helps
settings work for most egos though the later boards v1.06/1.08 the filtering is a bit better i beleive
someone will correct me
Thanks but my trigger is ok i really want the ball drop off settings etc etc arrh so many settings?
read the manual perhaps
ball 3
empty 1
fsdo 3ms
dwell 8 - 10 ms depending on LPR 9 is a safe bet
anything else?
ball 3
empty 1
fsdo 3ms
dwell 8 - 10 ms depending on LPR 9 is a safe bet
anything else?
Yes there is actually could you tell me how many turns from the minimum i should set my LPR to? taking note that i am using a high pressure reg. Cheers for the other info.
Another thing is im getting a wide range of chrono readings, could any1 suggest any possible reasons for this?
And before any1 starts yes i am a compleate idiot @ setting markers up, but im not a newb who has gone out and brought a top of the range gat before even playing a game
Chronoi readings will depend on how good your main reg is on your tank, how your LPR and dwell are set and if teh paint actually fits teh barrel or not.
Also if the marker is new you will be looking at 6 - 10,000 shots before the marker is broken in.
Settings are all dependant on your trigger set up.
Settings are all dependant on your trigger set up.
As said it is likely something to do with reg or lpr given them both a good clean and vaseline then see what happens, if you are unsure how to do this as you can't read manuals there are videos on the planetecliplse website that show the exact process.
Thanks for all the help guys, going to try and borrow a dive bottle and chrono this weekend and set it up proberly. Any other help or setting suggestions would be much apprechiated.