Built my Shocker, need Help..

[Speedyg4LS]

is the noid together right, i put the little end cap on the wrong way (with the little line facing the trigger) leaked like nothing else.

Speed's

 

[Skeet]

Which way should it face!

Its not leaking, its just not getting the bolt foreward enough to fire

 

[Speedyg4LS]

the line should face the body.

 

[deadbox]

have you installed a rear bumper on your Evolve bolt guide, if you have it will restrict air flow?

 

[Skeet]

Not as far as I am aware...where does it go?

 

[deadbox]

Some bolt guides have a plastic washer at the rear to make the bolt quieter. If you take your bolt guide out and look at the rear of the stem itself you will see a small hole. do not block it as evolve bolts are designed to run without one.

 

[Skeet]

Right..no, dont have a bumper...gun just wotnt push teh bolt far enough forward to fire

 

[deadbox]

what do you have your dwell set at?

 

[Skeet]

35 from bottom as per evolve, noid leaks tho so have PM'd teh guy i got it from..

 

[Andy]

strip your noid ,clean and regrease it. and also on the 2 screw in rods at the back have you put them in right