Bruce quick 1 for ya m8

[}{y8ri|)]

Hi there
Just used me gun for the first game and i could only get 257 f.p.s at 200 psi should it not be 150 input and 300 f.p.s
Any ideas

Cheers m8 if ya reply

CHEERS BATTY

 

[Philip]

Firstly knock it down....pretty bad at the pressure...

Secondly, clean/grease the max flo, if use air set the reg higher and lube everything

 

[bruce]

Hi Hybrid

you should get 280Fps to 290Fps at around 200 to 210psi. Are you running Co2 or air?? as this can effect it depending on your set up. Let me know your set up on your marker.

cheers

Bruce

 

[}{y8ri|)]

Just been cleaned greased and it on CO2 ??

 

[bruce]

Another couple of things to check are:-

1. Check bolt tip o-rings.
2. Grease the popet and check the spring, Make sure the poppet on the back of the gun is screwed the whole way in.
3. It may be a faulty solinoid pilot or it requires greasing on the three way solinoid.

heres a link explaining how its done

http://www.shockerworld.com/solenoid_cleaning.htm

cheers

Bruce

 

[}{y8ri|)]

oNCE AGAIN
tHANK YOU M8 iwill have a look and do the list and see how it goes also gonna get a derlin bolt



Cheers SmartBruce BATTY