Bob long alias intimidator rl

[KGB MOSCOW]

Can you help with my Russian legion bob long intimidator as it is leaking from the top of the LPR and the top ASA block housing and the gauge on the ASA block housing operating pressure is at 110psi also the dwell is at 10 milliseconds and it is not firing the paintball properly, the paintball is not making it out the barrel

THANKS

 

[Lightning]

Too much pressure, you need to lower it. The gauge should read around 50-70psi. Back the allen key screw out on the LPR. Also you might want to check the HPR pressure aswell. Is it a 2k2 or 2k5? You may also need to replace o ring.

 

[Kevin Winter]

Presumably, a RL is 2K5. Take of your LPR and change the two orings where it fits into the body. Also, take your LPR back to 70-80psi.