Autococker

[Stokecity_m]

ok, got three buttons on the back of the grip, what do they do?

 

[WingNut]

Planet have a very good website.

Take a look at these....

http://www.planeteclipse.com/site/eDownloads.asp

Also, a link to the User Manual.

http://www.planeteclipse.com/folders/Downloads/Manuals/EbladeVol1.pdf

Do you have the standard board or a ZeroB board??

If you have the ZeroB board, then the manual is here:

http://www.planeteclipse.com/Folders/Downloads/Manuals/ZeroBVol1A.pdf


Hope this helps...

 

[Stokecity_m]

cheers wingnut

 

[Stokecity_m]

got the standard board, the above link you posted isn't the same trigger grip as mine, mine hasn't got a screen

 

[WingNut]

Are you sure you have an E1 and not a Racegun grip frame???

I had a racegun some time ago and as far as I am aware, all of the Eclipse frames had LCD screens.

Take a picture of it an post it up.

 

[Stokecity_m]

lol, it does have a screen becasue it was dark i just thought it was some fom of milling on the back of the grip

must need a new battery.

i take it, it will come on even though i don't have air?

 

[A1-BOY]

correct, and if you turn off the eyes, by holding down the top button, the eyes will be turned off, and you will be able to click the solenoid/sear.

 

[Stokecity_m]

anyone recomend a good 1.1 fibre wrap bottle and reg?

is the cocker lp or hp?

 

[A1-BOY]

im using a cp tank and reg atm, very impressed so far, pretty light. but if you want to take it a step further get a stako from planet.

cocker is hp

 

[Skeet]

E1's originally came with a fat trigger, the Samurai was an upgrade which later might have been put on as standard.

Cockers run on HP, but...ideally want around 550-600psi feeding thr vertical regulator and around 325 psi from the vert reg, to the gun.