Any cocker techs in the North-East?

[MORPHUS]

cocker diagrams and good info

dave
have found this site really helpfull in the past with niggles with cockers....
try it,its got everything you need too know and some..........
try the forums there some really clued up people on there.......
laters
paul



click ere too solve all your problems.........


ps....try timing first,always a bitch when its out,sounds like your problem.........

 

[Parksy]

Cheers for the advice mate.

Upon looking at their forums I found this.

"Do the following- Get air (I am hoping you are using a N2 system and not co2) Gas your gun up fire like 2 shots with no paintballs/hopper on.

Then SLOWLY pull the trigger and watch the steps of the gun. There should be 3 steps you see and they are these

1- About 1/3 of the way through your trigger pull the gun should fire.

2- About 2/3 of the way through your trigger pull the gun should put the back block all the way back to recock the paintball marker.

3. You pull rest of way and release and the back block moves forward."

I have done this, now the problem I have is about a third of the way through the trigger pull it does fire, but it also recocks and puts the backblock to the back position at the exact same time it fires.... I take it this is wrong!!

Dave

 

[Si.]

Indeed.. you need the Lenghten your Timing rod so it's completed firing before it re-cocks.

 

[MORPHUS]

cocker problems

hi dave
no problem anytime
laters
paul