Another SLG problem

[zaris]

yeh, he sorted my marker last time too ^^, his kol hehe...but yeh i think am just gona send it back well..drop it off i should have wednesday off so it should be checked out soonish

 

[CaveMan]

If the paint was stored badly it may have become brittle thus causing breaks in the chamber.

Too true! I have had this problem before where i didn't store the paint correctly and i was chopping like mad, where did you store them?

 

[MJ]

for £152 you can get a standard brand new pmr!

 

[zaris]

well..i have tested the marker again, and i am officially saying that this marker has let me down to an unbelivable scale!

it is now leaking air aswell...which frankly i cannot belive, i have done nothing to it...its just not possible, i like don't know what to say anymore i can hear a slight layer of air leaking somewhere, and the marker chops in the chamber its fireing before the paint gets in and well...its doing exaclty the same problems as the other which is the leaking air and chopping the paint!

Too true! I have had this problem before where i didn't store the paint correctly and i was chopping like mad, where did you store them?

it was stored properly but it did the same to fresh paint!

for £152 you can get a standard brand new pmr!

i asked very nicely asked, if it was faulty for it to be replaced by a PMR, since it's the same price, which i really hope he does as i would not want to get any problems with a new SLG.

 

[jknight15]

Its a marker that has only just been released mate, so its likely to have its bugs. Give the guys at Dye some time to work out the production problems

Look at the Gen 1 Invert Mini's, plenty of complaints about that being a pain in the arse but now they have had chance to perfect it the Gen 2 Mini is now a muppet mower

 

[zaris]

yeah, the mini's are ridiculously good now , but i guess i just need something to replace this temporarily since i will be geting a PM7 or 8 soon, well when i gt the cash for it

 

[slam]

Can you narrow down where the air leak is?

eg through the barrel, back cap etc.

 

[zaris]

it is definatly from the entry point of the air cable from the regulator to the ASA....100% sure on that, which again was in my prior SLG!

 

[Rabies]

We have had the macroline fitting blow out from the ASA on an SLG. Replace with non-sucky fittings at the earliest opportunity.

 

[slam]

Ensure that the macroline is fitted correctly in the elbows (the metal connectors on the ASA and the hyper 3 reg) and also if you have cut it ensure that the macro line is cut as straight as possible.