Thanks Quacking Plums, its an 03 Shocker and its off to fury sports to have a lovely new paint job. Hoorah!
Annodising Query? New Question, HELP!
- Thread starter PaintballBudgie
- Start date
Spot on...Originally posted by QuackingPlums
I didn't see the first post so I don't know what marker you're talking about, but my guess is it's an Impy or a Shocker, in which case the holes are drilled all the way thru from the outside via the side chambers, into the main chamber. The outside holes are then filled and loctited with small grub screws that you should NEVER need to remove. This is the only way to get a passage for air between two tubes inside your body, see?
When the marker gets stripped those screws are bye bye, you'll have to get replacments!
Hopefully they'll completely break down otherwise you may have problems.
Suprised no-ones mentioned this previously.....
Paul
ps thread lock is best removed with heat, in this case as you'd already stripped the marker then boiling water would've worked a treat!
Hopefully they'll completely break down otherwise you may have problems.
Suprised no-ones mentioned this previously.....
Paul
ps thread lock is best removed with heat, in this case as you'd already stripped the marker then boiling water would've worked a treat!
TO elaborate on Paul's post, when the marker gets dumped in the big vat of acid the (presumably steel) screws will get eaten away. If the whole screw doesn't get eaten then you might end up with some remnants left in the threads which will bugger up your chances of getting replacement screws back in (if you can even get them)!!!
Used a cooks blow torch on them last night, no joy.
Am thinking I won't bother now but thanks for the help all.
Got intimate with my shocker at the very least.
Am thinking I won't bother now but thanks for the help all.
Got intimate with my shocker at the very least.
Oh and a side note for shocker owners, have some NDZ rip triggers, wave triggers and some talon snatch grips coming form the states.