Angel Velocity Drop Off

[Sk8PadTrev]

My angel has an AIR input of approx 600-650 psi, my lpr is at 6bar... but after approx 3balls per sec Im getting velocity drop off.

Why, As far as I can figure it would probably be to do with the 'low-ish' input preassure, but loads of players run their angels at 600 PSI, with no problems

Also wouldnt cranking up the input raise my LPR preassure ... PLUS EXTRA PROBLEM my velocity adjuster is nearly all the wway screwed on (nearly at lowest poss velocity)

All help appreciated

Cheers
Trev

 

[Buddha 3]

I've seen this before. Chances are that the regulator on your air system is dirty, and you don't get the usual cycling rate because of that. See if cleaning it helps.

 

[brian]

Originally posted by Sk8PadTrev
My angel has an AIR input of approx 600-650 psi, my lpr is at 6bar... but after approx 3balls per sec Im getting velocity drop off.

Why, As far as I can figure it would probably be to do with the 'low-ish' input preassure, but loads of players run their angels at 600 PSI, with no problems

Also wouldnt cranking up the input raise my LPR preassure ... PLUS EXTRA PROBLEM my velocity adjuster is nearly all the wway screwed on (nearly at lowest poss velocity)

All help appreciated

Cheers
Trev

 

[KillerOnion]

Your LPR is precisely that, a low pressure regulator. It is set to a pressure which the pressure of input will not change.

 

[brian]

SEND YOUR LPR TO WDP AS IT SOUNDS LIKE IT COULD DO WITH RE SHIMMING...BRIAN ..... RAIDERS PAINTBALL GOONS

 

[Collier]

Originally posted by brian
SEND YOUR LPR TO WDP AS IT SOUNDS LIKE IT COULD DO WITH RE SHIMMING...BRIAN ..... RAIDERS PAINTBALL GOONS

Send to wdp for reshimming? :Confused: surely you don't mean to add shims?

Paul.