air leak?

[lemonadeX]

So it's leaking, and also not firing? Try resetting the HPR and LPR to stock values, in case too much or too little pressure is preventing the bolt from cocking and/or moving.

Turn both regs all the way down then back both out ~3 full turns, and see if that helps.

-Will

 

[echo34]

it is not leaking any more, it just won't fire. i'll try that.

 

[Skeet]

If its not firing...eyes off...does the solenoid click?

 

[echo34]

no, there is no clicking, nothing happens at all.

 

[lemonadeX]

Fresh battery? Maybe a wire has come loose from the board (noid, trigger).

-Will

 

[echo34]

it has a new battery, and the marker turns on and all the lights work.

 

[Skeet]

Your solenoid wires are either broken, or crimped somewhere...check them...PM FLY on here for help.

Try tripping the trigger an dlooking to see if any lights flasj when you do that, it should prove that you are getting trigger pulls...make sure eyes are off.

 

[echo34]

when i pull the trigger (with a ball in) the green light flashes. i have tried it with the eyes off too, but nothing happens. when i turn the on/off on, while im twisting the screw air leaks from the bottom of the hyper 2 regulator, and stops when the screw is fully twisted, is this meant to happen?

 

[Skeet]

If you arent getting any clciking, with gun on, eyes off then teh solenoid isnt firing...r=try tripping teh trigger swicth on teh board by hand, if not...your solenoid wires are broken somewhere...

 

[echo34]

it clicks when i tilt the marker, and the trigger clicks when i pull it, but nothing else.