a.i.r. on an impy

[jahlad]

ok am i right in thinking that to use an a.i.r on an impy im gonna have to convert it to run low pressure?

 

[Cube]

Originally posted by jahlad
ok am i right in thinking that to use an a.i.r on an impy im gonna have to convert it to run low pressure?

er don't you just switch the display to output pressure and dial it down to whatever pressure you want?

 

[jahlad]

yer but i thought impys need a super low imput...i might be wrong

 

[Cube]

Originally posted by jahlad
yer but i thought impys need a super low imput...i might be wrong

the eclipse impy is listed as being 100-200psi, (150) for testing.

Can you set your air to 150 output?

 

[jahlad]

yep but according to the manual the air wont show the pressure below 198

 

[dr.strangelove]

The A.I.R shows pressures down to 99psi (unless mine's special)

 

[Stan]

If it's an Eclipse Impy it'll have the front reg anyway... If not then yeah, you'll need to dial the AIR down... I think that mine shows down to 100psi then low pressure!

Just ring WDP and ask. They'll be happy to help.

01213282228

(Number now saved in my phone after an annoying experience in Amsterdam)

 

[jahlad]

cheers guys, ive emailed wdp just to make sure.....ive no air at the mo to check it.

its a freak factory impy with no inline reg

 

[MrCosworth -=HypnotizeSweden=-]

I use a.i.r on my impulse, But you will need a Inlineregulator to reduce the pressure to say 150-170psi. The a.i.r wont manage to flow enough at such low pressures. I use a centerflag inline reg which is fed with 650psi´s from the a.i.r.

Hope this was an answer on your question...

Regards

Mikko Team Hypnotize sweden

 

[jahlad]

cool cheers for the info,

according to the a.i.r manual it can be converted to run high flow between 100 and 500 psi

will let you all know what wdp say when they email me