This entire marker looks highly interesting..... Might see what others say, then get it. After saving up lots of money.
2013 Bob Long Insight NG
- Thread starter Bolter
- Start date
This entire marker looks highly interesting..... Might see what others say, then get it. After saving up lots of money.
MODS = Do something Now ?? before it gets any worse,
Don`t let a good thread get ruined. . . Please.
Don`t let a good thread get ruined. . . Please.
Anyone tried on of the NG yet? Does it make you feel warm, sexy and highly erect like all bob longs make you feel?
The teams got two on order at the moment as well as a VCOM. We'll let you know as soon as they land 
Well, this is from Facebook, but I've seen it pop up on PBN as well. Tuning tips for the insight:
"If you own an insight PLEASE READ
Just spoke with Bob Long and he gave me some tricks and tips for tuning the insight and efficency.
You should get about 12 pods off of a 68/45 fill
1. Set your dwell to 9. It slows the bolt down just enough to stop the bolt from clipping the second ball in the stack AND creates a little less kick.
2. Replace your size 10 oring on the shut off after 5-10 cases if your seeing efficency problems. This is because that oring gets tighter as it goes and it creates drag.
3. There is a pressure tester available for the insight. You want it to shoot 300 fps with about 150-155 psi. If you need to set it to 180 psi to get 300 fps it means your probably dragging and its the 10 oring on the shut off AND on the bolt shaft.
4. Replace the shaft rear 10 oring or both. That can cause drag as well.
6.USE A TON OF LUBE. This is a spool gun and it drinks lube like a drunk. If your having efficeny problems then its because of drag somewhere.
7. Your tank regulator is one of the main problems with guns pressures. Just cause its says its 300psi or what ever dosent mean it really is. Test your tank.
8. The video where bob got crazy efficeny the tank was filled to 45/45 COLD. and it the dwell was 6 with the fps 280. This means that depending on circumstances you wont see it THAT crazy but the gun is very capable with getting crazy efficeny.
9. If you cant get your gun to work right, CALL BLAST. They are here to help and serve and want to take care of you and they will. If you have any issues feel free to contact me and Ill help you get your gun to them.
- Dan http://www.yourpbfriend.com/default.asp"
"If you own an insight PLEASE READ
Just spoke with Bob Long and he gave me some tricks and tips for tuning the insight and efficency.
You should get about 12 pods off of a 68/45 fill
1. Set your dwell to 9. It slows the bolt down just enough to stop the bolt from clipping the second ball in the stack AND creates a little less kick.
2. Replace your size 10 oring on the shut off after 5-10 cases if your seeing efficency problems. This is because that oring gets tighter as it goes and it creates drag.
3. There is a pressure tester available for the insight. You want it to shoot 300 fps with about 150-155 psi. If you need to set it to 180 psi to get 300 fps it means your probably dragging and its the 10 oring on the shut off AND on the bolt shaft.
4. Replace the shaft rear 10 oring or both. That can cause drag as well.
6.USE A TON OF LUBE. This is a spool gun and it drinks lube like a drunk. If your having efficeny problems then its because of drag somewhere.
7. Your tank regulator is one of the main problems with guns pressures. Just cause its says its 300psi or what ever dosent mean it really is. Test your tank.
8. The video where bob got crazy efficeny the tank was filled to 45/45 COLD. and it the dwell was 6 with the fps 280. This means that depending on circumstances you wont see it THAT crazy but the gun is very capable with getting crazy efficeny.
9. If you cant get your gun to work right, CALL BLAST. They are here to help and serve and want to take care of you and they will. If you have any issues feel free to contact me and Ill help you get your gun to them.
- Dan http://www.yourpbfriend.com/default.asp"
