Hi all,
First up I have my custom CP DM8 for sale.
This is a one of one marker, there are no others like it out there !
It has been reanodized this year to dust black as well as having my unique Custom Products design lasered on both side by Sloth. The marker is in great condition. It does come with a Boomstick, not pictured, this does have a little anno wear from use but nothing serious.
The upgrades for this marker include :
New anno
Custom one off full body lasered design
CP Trigger
CP Continuous Flow Plug
CP InLine Reg
CP Purge ON / OFF
DM9 Eye Pipe
DM9 Detents
It is a great marker but I have a DM9 and DM7 so it is time to pass one on.
£450 posted rec del
PIC 1
PIC 2
PIC 3
===============================================================
===============================================================
Next up I have a custom built Karni Autococker.
The body has been shortened. From the rear of both chambers. The front has not been touched so you still get the large air volume
.
A turtle half block kit is installed. You will never be hit in the goggle again by the back block or need a beaver tail.
Dye Hyper reg installed.
EGO 06 frame and trigger installed.
Zero B board installed.
MQ2 valve installed. This £150 solenoid valve replaces nearly the entire internals of the bottom chamber. So you no longer need, rex dialer, hammer, spring, sear, sear trip solenoid, etc. It is controlled by the same board in place of the old grip frame mounted sear trip solenoid.
Due to the removal of the material due to the installation of the half block and the removal of superfluous internals due to the install of the MQ2 valve the marker is now much lighter than stock.
I bought this as a project as I was brought up on custom cockers and has had 5 in my time. With me being DYE sponsored the actual gun time this would see would be negligible so I am looking to sell it on.
£300 posted rec del
PIC 1
PIC 2
===============================================================
===============================================================
Standard DM series feedneck in great condition in dust black.
£15 posted rec del SOLD
Custom Products DM series trigger
£15 posted rec del SOLD
PIC 1
===============================================================
===============================================================
Lastly I have some pads.
A Proto bounce vest L. Only been used a few times.
£20 posted rec del Sold
A set of near new Proto knee pads M
£15 posted rec del Sold
PIC 1
Regards
Ed
http://www.paintballskirmish.co.uk/venue/crawley/home.html
First up I have my custom CP DM8 for sale.
This is a one of one marker, there are no others like it out there !
It has been reanodized this year to dust black as well as having my unique Custom Products design lasered on both side by Sloth. The marker is in great condition. It does come with a Boomstick, not pictured, this does have a little anno wear from use but nothing serious.
The upgrades for this marker include :
New anno
Custom one off full body lasered design
CP Trigger
CP Continuous Flow Plug
CP InLine Reg
CP Purge ON / OFF
DM9 Eye Pipe
DM9 Detents
It is a great marker but I have a DM9 and DM7 so it is time to pass one on.
£450 posted rec del
PIC 1
PIC 2
PIC 3
===============================================================
===============================================================
Next up I have a custom built Karni Autococker.
The body has been shortened. From the rear of both chambers. The front has not been touched so you still get the large air volume
.A turtle half block kit is installed. You will never be hit in the goggle again by the back block or need a beaver tail.
Dye Hyper reg installed.
EGO 06 frame and trigger installed.
Zero B board installed.
MQ2 valve installed. This £150 solenoid valve replaces nearly the entire internals of the bottom chamber. So you no longer need, rex dialer, hammer, spring, sear, sear trip solenoid, etc. It is controlled by the same board in place of the old grip frame mounted sear trip solenoid.
Due to the removal of the material due to the installation of the half block and the removal of superfluous internals due to the install of the MQ2 valve the marker is now much lighter than stock.
I bought this as a project as I was brought up on custom cockers and has had 5 in my time. With me being DYE sponsored the actual gun time this would see would be negligible so I am looking to sell it on.
£300 posted rec del
PIC 1
PIC 2
===============================================================
===============================================================
Standard DM series feedneck in great condition in dust black.
£15 posted rec del SOLD
Custom Products DM series trigger
£15 posted rec del SOLD
PIC 1
===============================================================
===============================================================
Lastly I have some pads.
A Proto bounce vest L. Only been used a few times.
£20 posted rec del Sold
A set of near new Proto knee pads M
£15 posted rec del Sold
PIC 1
Regards
Ed
http://www.paintballskirmish.co.uk/venue/crawley/home.html
