help mee!!??

[Ali]

today at cpps i cronoed my ego7 in the mornin and it wouldnt go past 190fps. so i stripped, cleaned and lubed the hpr and lpr. that worked and it was shootin fine at around 290 - 295fps. i left it for an hour or two until we were about to play to find it went back down to 160fps and wouldnt go higher so i just gave up on it.

any ideas?? also someone mentioned to put some eclipse oil in the asa as that would help somehow???


cheers

 

[Lump]

maybe the bottle pin, some times they need half a turn back out with the purge knob

 

[Ali]

yeah i always do that...thanks though mate

 

[Devrij]

Battery dude, it's always the battery. A bad battery (I've even seen new ones from the packet fail) will not open the noid long enough to drive the rammer with sufficient force to open the valve long enough to release all the air to propell your balls, which gives low velocities or in the worst cases a pfft pfft sound and nothing else. Change your battery and you'll be fine.

Egos: if it's leaking it's an o-ring, pretty much anything else is the battery.

 

[Ali]

this has happened a few times before, and it was just a case of cleaning/relubing the hpr. but you may be right this time

 

[SAMUEL.D.RYAN]

Egos: if it's leaking it's an o-ring, pretty much anything else is the battery.

Aye, but i'll add QEV to "o-ring" on anything pre-09

 

[chrizwheatley]

Battery dude, it's always the battery. A bad battery (I've even seen new ones from the packet fail) will not open the noid long enough to drive the rammer with sufficient force to open the valve long enough to release all the air to propell your balls, which gives low velocities or in the worst cases a pfft pfft sound and nothing else. Change your battery and you'll be fine.

Egos: if it's leaking it's an o-ring, pretty much anything else is the battery.

Ali do what this guy says, i embarrassed myself enough when i changed every single o ring and totally stripped 1 of my egos then spat the dummy out only for someone to put a different battery in and it worked perfect lol

 

[Devrij]

Aye, but i'll add QEV to "o-ring" on anything pre-09

Very true, I'll certainly agree with that lol. Damn those tiny little bits of rubber!