EGO 05 not shooting right.

[campbell08]

Okay, i try the eyes thing. Tiffer im not mobile I'm going to try a few more things if it still doesn't work i might send it off to planet but im going on holiday tomorow so it will have to wait

 

[Potter Loki]

checked the hopper is feeding paint properly?

 

[campbell08]

Right, i have done all the tests and i think it's all down to the most simple thing the trigger. Which is not bouncing back as fast as it used to.

 

[Impulse raider]

Stretch the spring then

 

[tiffer]

Right, i have done all the tests and i think it's all down to the most simple thing the trigger. Which is not bouncing back as fast as it used to.

Remove the frame and trigger,then clean and lube the trigger pivot pin..
Maintenace is fun....

Stretch the spring then

Ha ha you cowboy.....

 

[campbell08]

Remove the frame and trigger,then clean and lube the trigger pivot pin..
Maintenace is fun....

Will do when i get back from holiday, as i don't want to start it now because my room is a bombshell and i will probley end up losing some thing
Thanks for the help guys!

 

[PointyElf]

Today while i had some free time at the site i took the board out of the ego, just to put in another and see whether its the gun, or board, the board i took out didn't seem to fit but there was a little paint on the connectors that power the board? the red and black wires if its a normal 05, so i suggest taking the board out just giving it a slight clean removing paint and trying again. If this doesn't work i have no clue

 

[tiffer]

Today while i had some free time at the site i took the board out of the ego, just to put in another and see whether its the gun, or board, the board i took out didn't seem to fit but there was a little paint on the connectors that power the board? the red and black wires if its a normal 05, so i suggest taking the board out just giving it a slight clean removing paint and trying again. If this doesn't work i have no clue

Can you post pictures it may help...
You never said if it worked when you changed it over?
Tbh some of the post is confusing.
Is it the normal press fit or has someone fitted a connector?

 

[Gee Tee]

Campbell, Ive only just spotted this post was yours. Could have had a look at your Ego at Holmbush had I realised. Sounds like trigger adjustment to me or magnet return setting. You might have fixed it before I next bump into you. I used to shoot an 05 Ego & happy to have a go if it's still giving you hassle.

 

[tiffer]

Campbell, Ive only just spotted this post was yours. Could have had a look at your Ego at Holmbush had I realised. Sounds like trigger adjustment to me or magnet return setting. You might have fixed it before I next bump into you. I used to shoot an 05 Ego & happy to have a go if it's still giving you hassle.

I'll be down for the next pump day,if it's not sorted by then...