PM8 Air Leak

[BigDaveUK]

Sounds like its coming from solenoid, can feel some air coming from grip frame above trigger.

Tried replacing solenoid and just about every o-ring on the marker!! any ideas please??

 

[rayko]

Replace and lube the sail o-ring.

 

[paintnut]

try replacing the little o-ring in the on/off valve unsrew the small bolt and its under there.a little white one.

 

[Gassy]

http://www.pbnation.com/showthread.php?t=1623383

Nice looking pm8 by the way

 

[Mactoshdog]

does the noid sit on a rubber mat like on a PMR?
if it does, try cleaning, lubing, and make sure its replace correctly.

 

[BigDaveUK]

Thanks for the help guys,

Replace and lube the sail o-ring.

Which is where exactly?

try replacing the little o-ring in the on/off valve unsrew the small bolt and its under there.a little white one.

Already peplaced the whole oops

does the noid sit on a rubber mat like on a PMR?
if it does, try cleaning, lubing, and make sure its replace correctly.

It has a seal on it, and i put a new 'noid on just to see if it was that.

http://www.pbnation.com/showthread.php?t=1623383

Nice looking pm8 by the way

Thanks, i`ll have a read through that!

 

[rayko]

• Remove bolt tip o-ring (pitch it with your fingers and you can remove it quite easily)
• Remove cylinder from bolt (you can now do this as you've pulled the bolt tip o-ring off)
• If you look at the bolt now, its the middle o-rings of the three you've just revealed. You'll need a black number 15 o-ring and some lube.