Proto Slg 09 UL Back Cap

[51lver]

Where I can get one from. And how to replace??

 

[jacktheman2]

try lips

http://www.lpspaintball.biz/acatalog/PMR_Accessories.html

or
slothball

http://www.slothball.com/viewcat.php?category=40

hope that helps.

 

[51lver]

try lips

http://www.lpspaintball.biz/acatalog/PMR_Accessories.html

or
slothball

http://www.slothball.com/viewcat.php?category=40

hope that helps.

Thanks! So how I go about replacing the cap?

 

[Bambulus]

Use an allen key to unscrew the back cap, and screw the other one in.

Simple as.

 

[jacktheman2]

consult your manual. If you do have any more problems ask again her. Or you could try matrix owner.com witch has full and in-depth tec information about all matrix (dye) markers.

 

[51lver]

Downside is the Allen key is spin freely. the hole has been rounded.

2nd SLG.

 

[jacktheman2]

Downside is the Allen key is spin freely. the hole has been rounded.

2nd SLG.

arr uness someone on her has a tip or trick on how to get it out apart from that i would suggest sending it back to dye.

 

[JWarren]

Wrap material around the allen key or something. Should work aslong as there is enough to increase the friction.

 

[Ash - GI Sportz]

Hi

The links posted above are for PMR back caps, they are not compatible with the SLG.

E-mail me a photo of the damage to your SLG back cap - eurotech@dyeprecision.com - and I can advise the best action to take.

Do you have an SLG08, SLG UL, or SLG09?

Thanks

Ash Chaplen
DYE Europe

 

[51lver]

Hi

The links posted above are for PMR back caps, they are not compatible with the SLG.

E-mail me a photo of the damage to your SLG back cap - eurotech@dyeprecision.com - and I can advise the best action to take.

Do you have an SLG08, SLG UL, or SLG09?

Thanks

Ash Chaplen
DYE Europe

I have SLG 09 UL. be emailing the picture tonight.

What the damage looks like.

If was to buy a Lucky DM5 Bolt Kit will it fit the SLG 09?