09 Ego noid leak

[J@mes]

My Ego 9 (brand new 2 weeks ago) has developed a leak.

This is where its leaking from:


Its thrashed a bumper oring, so I've replaced that and still the same. I've rather not take the solenoid off, as its still under warranty and I'm unsure if that's a warranty voiding action.

So, what else can I do, apart from taking the solenoid off and seeing if the gasket is damaged

 

[synergy]

get in touch with pe its under warranty they will sort it out for you bud

 

[dicksin200]

you have

you have got part of the o ring in there m8 did it on mine send it back to planet m8 seems to be a common fault just got mine back needs bits changing you can clean it but it going to have to go back ask for robert m8

 

[J@mes]

Found the issue:

Those little bits of the oring had worked their way into the solenoid.

All fixed and working perfect.

 

[dicksin200]

no it aint

as stated before m8 it will do it again and again send it back to planet m8 there is a few bits need changing or at least give them a ring you dont want to be stripping that niod down in the field

 

[J@mes]

as stated before m8 it will do it again and again send it back to planet m8 there is a few bits need changing or at least give them a ring you don't want to be stripping that noid down in the field

Im not so sure. I think it was over dwelled from the factory (Came with dwell set to 14ms). I have even done the test to see if the noid is over dwelling, which it doesnt seem to be.

I will try sweet spotting the dwell when I can get a chrono infront of me, for now a dwell of 9ms seems to be working fine.

Although I patiently await these new parts to avoid this happening.

 

[dicksin200]

sound

i had exact problem with minesorted the dwell but when i rang up they said they wanted to look at it sent it back and they had to change some parts also