ego 9 barrel stuck

[danny_noobs]

urmmm put an a4 sheet of paper around it then use a trusty wrench

 

[jitsuwarrior]

Two small strap wrenches.
Heat the back just before the join and unscrew.

Best comment on here. If you use this with Chriz suggestion of Cooling your are laughing because with the two small strap spanners it will split easy. Then lube it to prevent this again.

Hope that helps you

 

[jahlad]

rubber washing up gloves for extra grip, then when its appart make sure it has an oring on it and put some oil or grease in the threads before you put it back together

 

[chrizwheatley]

Is it best to use pb oil or a bit of pb lube to prevent further occurrences?

 

[Rider]

i'm a big fan of lube....


in more ways than one

 

[ConnorA1]

still no luck, i have tried the dry firing idea and all that did was make the tip slippy so i couldnt get a proper grip
tried the rubber glove one and using a wrench
its stuck in there tight

looks like i will have to keep it as a one piece then haha

 

[chrizwheatley]

Last resort is put something small through the holes in the porting (allen key or something) and try twisting it off that way... long shot but might work!

 

[ConnorA1]

Last resort is put something small through the holes in the porting (allen key or something) and try twisting it off that way... long shot but might work!

will give it a go!

 

[jahlad]

doing that will destoy it, dont try that

try getting someone to help you turn it?

 

[chrizwheatley]

The hard part is finding something small enough that is hard enough to fit the hole and hold the strain.

Sid will probs have a handy 'tool' that fits the bill *cough cough* lol