ego8 problem

[BubbleGumBob]

ok simply not firing, yet it get more complex,

when u pull the trigar the simple reacts in a sense that tells you i knows the trigar is being pulled, also when i turn the marker off i have to press the button and cnnot click the triggar to turn it off, eyes on- eyes off it wont fire

and i have changed that bateray and no luck

any idears?

 

[J@mes]

Have you got it on opto or micro switch? If its micro switch make sure the switch is actually being operated by the pin when you pull the trigger.

 

[NitroBall]

Possible you have settings on Micro switch, but the back of the trigger activation point on the board is adjusted to opti or vice-versa.

 

[BubbleGumBob]

Possible you have settings on Micro switch, but the back of the trigger activation point on the board is adjusted to opti or vice-versa.

if that is the problem how would i fix it, i think its on opto

 

[Potter Loki]

go into settings and try it on microswitch and opto, adjust accordingly

 

[NitroBall]

if that is the problem how would i fix it, i think its on opto

Say the board was originally set to Micro switch in hardware with the correct adjustment to the trigger for micro switch.
Now if you reset the board to factory settings, the default value for hardware is OPTI. (Theres a chance for the trigger not to activate the OPTI switch, as trigger needs to be adjusted in a different position to the Micro switch settings).

The same would happen if you loaded one of the factory presets, the hardware defaults to OPTI.

If this is the reason for your marker not firing, then an easy fix (unlock board by pressing button inside of grip if you have board in lock position) scroll down to hardware on your board , change value to Micro.