I don't really have the time for this project anymore so hopefully someone who has will be able to complete it. I've learnt a lot about shockers and how stuff works with this project, using www.zdspb.com as my bible.
To Quote Stencil:
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01831.jpg
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01832.jpg
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01833.jpg
Currently everything seems to be in working order, I've had it cycling with no leaks (just no chrono or enough air to set it up correctly), but I havn't shot paint. The solenoid is connected correctly and works fine, and all the internals are fine too.
The only work that needs doing is to tap a rear frame screw in the body (currently, the front frame screw holds the marker pretty tightly and is fine for tech work, but I wouldn't like to play with just the one), ptfe tape / loctite a 0-300psi gauge (included) on the 15* frm, and ptfe tape / loctite an elbow into the reg. And of course setting it up over a chrono.
The project consists of:
Ego 05 frame with stock board and star trigger.
06 Shocker body with stock internals, detents and swivel-collar locking Feedneck.
Macdev 06 gladiator reg.
SP S-rail and cp on/off.
Hybrid 15* frm / front reg mount.
14" .692 Dye Ultralite barrel.
I'll include the rear frame screw, black macroline, 0-300psi gauge for the frm and a 90* elbow for the reg (just need some ptfe tape or loctite (which I don't have) to secure them). I also have a set of dm eyes fitted with an ego connector, however i'm not sure if they work and the body would have to be milled further.
I'm looking for £75 including postage and I'll also listen to offers, but please if using paypal add the 4%. Trades welcome too. And sorry but I won't be splitting unless I get interest in most of the parts.
Any questions then please don't hesitate to ask!
To Quote Stencil:
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01829.jpg
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01831.jpg
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01832.jpg
http://i17.photobucket.com/albums/b95/seanyboyuk/DSC01833.jpg
Currently everything seems to be in working order, I've had it cycling with no leaks (just no chrono or enough air to set it up correctly), but I havn't shot paint. The solenoid is connected correctly and works fine, and all the internals are fine too.
The only work that needs doing is to tap a rear frame screw in the body (currently, the front frame screw holds the marker pretty tightly and is fine for tech work, but I wouldn't like to play with just the one), ptfe tape / loctite a 0-300psi gauge (included) on the 15* frm, and ptfe tape / loctite an elbow into the reg. And of course setting it up over a chrono.
The project consists of:
Ego 05 frame with stock board and star trigger.
06 Shocker body with stock internals, detents and swivel-collar locking Feedneck.
Macdev 06 gladiator reg.
SP S-rail and cp on/off.
Hybrid 15* frm / front reg mount.
14" .692 Dye Ultralite barrel.
I'll include the rear frame screw, black macroline, 0-300psi gauge for the frm and a 90* elbow for the reg (just need some ptfe tape or loctite (which I don't have) to secure them). I also have a set of dm eyes fitted with an ego connector, however i'm not sure if they work and the body would have to be milled further.
I'm looking for £75 including postage and I'll also listen to offers, but please if using paypal add the 4%. Trades welcome too. And sorry but I won't be splitting unless I get interest in most of the parts.
Any questions then please don't hesitate to ask!
