mini breaking paint

[sol man jay]

can anybody help i was playing the other day and my mini was breaking paint on about every third shot after cleaning the marker and hopper for the forth time i gave up not sure if it was in the feed neck or just infront of the bolt it was a cold day and the paint was frostbite tried cleaning the detents and a bit of oil and raiseing the hopper in the feed neck but problem was still there the only thing that seemed to help a little was raiseing the hopper slightly out of the feed neck but was still breaking when fireing fast

 

[obladeo]

where were you getting the breaks?

What hopper was you using?

 

[chuckwood]

Jay was using a brand new rotor & the breaks were occurring in the breach only.

 

[chrizwheatley]

Turn the BIP settings up as per the manual, also might be worth turning the gauge down to 1 tick under the 200psi and using the back cap to adjust the velocity. BUT TRY A NEW BATTERY FIRST

 

[Gassy]

Turn the BIP settings up as per the manual, also might be worth turning the gauge down to 1 tick under the 300psi and using the back cap to adjust the velocity. BUT TRY A NEW BATTERY FIRST

and blow the guts out of your mini

he means 1 tick below 200psi

 

[westy880]

i had ball chopping problems with my mini when i first got it. put the BIP all the way up for a couple of thousand balls and that sorted it out. now the BIP is set at around 5 and it is working fine.

 

[chrizwheatley]

and blow the guts out of your mini

he means 1 tick below 200psi

Yip i most certainly did, new laptop and the keys are a bit funny, cheers gassy

 

[sol man jay]

had to take the mini to bits to give it a clean and tried a hopper of paint through it today and seemd to work fine think it was just the cold weather and paint but if it dose it again ill try your advice thanks for the help guys

 

[Bolter]

On very cold days, I turn the BIP up to 12. Unfortunately the cold is not good for most guns.