would this be ok with E2 trilogy?

[londonladliam]

plan to just it for fun not in comps or nothing major would this be ok on an E2'd trilogy?

description:

"We have here a Evil 0.7L 4500 psi Air Bottle and a Kee Sports CE Approved Reg, The reg is a brand new reg CE approved from Kee Action Sports, the bottle is second-hand the born date on the bottle is 2004/08"

 

[arg1271]

do you know if it's a high or low pressure reg?

not too hot on old cockers so I'm not sure what reg your marker would require.

 

[londonladliam]

ill find out..

what if its high?

what if its low?

i mean my guna got palmers micro rock and cp reg on it very lite slick bolt if that helps

 

[SAMUEL.D.RYAN]

Generally, you should run HP, but LP will probably work too, you might need to tune and then time your marker to get it to shoot high enough. If this doesn't work, try a different set of springs, or get a HP reg for your bottle.

 

[Hawkins]

thatll work fine on a trilogy hp is better..

ever thought about buying a different cocker body and putting the e2 onto it ??

 

[londonladliam]

i have this was my 1st gun that i built....i also have an E2'd belsales evolution

its wird i starteed building the trill as my 1st marker...then got offerd the belsales so its was like :| lol

but got it any way

cheers for the info on the tank

 

[londonladliam]

btw pic of the gat i want this bottle to run

http://www.pinkbike.com/photo/2556529/

 

[Hawkins]

i have this was my 1st gun that i built....i also have an E2'd belsales evolution

its wird i starteed building the trill as my 1st marker...then got offerd the belsales so its was like :| lol

but got it any way

cheers for the info on the tank

Same here.. Ebladed a trilogy pro and then slapped it onto a orracle and much much more..

 

[Gee Tee]

The 0.7 should be ok if you can fill to 4500psi, but a lot of sites now only fill to 3000psi and that won't give you a lot of shots per fill. I would guess a hopper and a couple of pots would see you struggling for air.

 

[nat]

btw pic of the gat i want this bottle to run

http://www.pinkbike.com/photo/2556529/

Nice pic, i had one like it, operating pressure on (stock spring) is normally around 300-350psi, i'd stick with high pressure reg. Also your gat would look better if you removed the old barbs and ran the cocking noid wire through the old 3-way(you have to take off then reconnect the the mini molex plug though!). just my 2 cents!
My Trill used to give 1200 shot on 3000psi bottle,but with custom springs fitted and the operating pressure at 220 i was getting 1800 shot from a 3000psi bottle.

Woody.