low pressure pre-set reg

[vmaxnick]

Don't know if thats the right thing to call them, but I am after a low pressure pre-set reg 450psi I had to remove a fill valve from one of my fiber wrap bottles as it was leaking (O ring) unfortunately the previous owner had used loctite so now I have no threads

 

[Cliff-In2Deep]

Don't know if thats the right thing to call them, but I am after a low pressure pre-set reg 450psi I had to remove a fill valve from one of my fiber wrap bottles as it was leaking (O ring) unfortunately the previous owner had used loctite so now I have no threads

That's a low psi your after, or were you after 4500psi...

 

[vmaxnick]

That's a low psi your after, or were you after 4500psi...

What it is cliff; I have upgraded to an Angel 06 which apparently runs happiest on about 450 psi at the ASA (My bottles are all 4500psi) as I understand the Angel mini regs can't cope well with the usual 850 psi that you get from a normal hp pre-set reg air bottle.
As I understand it the blue bottle regs are usually LP and the black ones HP
I don't want to use separate regs (Max-flo or Angel air etc) as I want to be able to swap the bottles about as all my markers (Ions, IR3s etc) will all run ok on LP
To clarify as I understand it; my bottles are filled to 4500psi (300bar) but the pre-set reg (screwed into the bottle) is either outputting LP (450psi) or HP (850psi) I need a new pre-set reg of the low pressure type (450psi) If I am wrong, somebody please put me right!

 

[Tom Allen]

That's a low psi your after, or were you after 4500psi...

Cliff, is this thick week for you.