Hey guys im looking to build a shocker so what do i need including everything
and if any one has any parts for sale if u can pm me please
Thanks
and if any one has any parts for sale if u can pm me please
Thanks
Shocker
- Thread starter Chinn
- Start date
how much detail do you want?
Screw sizes, amount of o-rings, magnets?
or just general stuff like noid, boards, body, frame ect.....
Screw sizes, amount of o-rings, magnets?
or just general stuff like noid, boards, body, frame ect.....
you can down load the manual for an NXT from our site - will take you through the full breakdown.
http://www.scottishwarriors.co.uk/index.php?action=tpmod;dl=item6
http://www.scottishwarriors.co.uk/index.php?action=tpmod;dl=item6
yeah like stuff to make a shocker eg noid board frame ect and some screws would be useful
btw what magnets are used?
i might have some parts going spare in the next couple of days, what sort of stuff you looking for
or have a Balf on standby to build one up for youI would strongly suggest buying a fully assembled shocker
Oh thats a point, pick some beer up when you come or I will be forced to miss things, things that no-one will be able to fix on sundayor have a Balf on standby to build one up for you
but back to the thread.
Feedneck (old SP thread)
Body
Left solenoid insert
Right solenoid insert
Bolt guide
Bolt sleeve
Bolt
Firing can
Eye ribbon
Eye plate
Vision detent
Non-vision detent
Manifold plate
Solenoid
Upper board
Wiring Harness
Lower board
Frame
Trigger
Rail ASA combo
FRM (front reg mount/Vertical ASA whatever they feel like calling it)
Regulator
Barrel (threads depend on the body you choose, they are either shocker or cocker threaded)
Screws.
Shocker SFT:
Description: Screw thread: Screw type:
Grip panel screws (4) 6-32 x 5/16" button head, phillips
Frame/body screws (2) 10-32 x 11/16" button head, 1/8" hex socket
PL frame, rear body screw 10-32 x 1/2" socket head, 5/32" hex socket
Note: "PL frames" include the 06 Dynasty, Dark, and Tonton frames.
Trigger return magnet set screw 1/4-28 x 1/4" 1/8" hex socket
Stock trigger pre-travel set screw 4-48 x 3/8" 0.05" hex socket
Stock trigger post-travel set screw 4-48 x 1/4" 0.05" hex socket
Stock trigger firing point set screw 4-48 x 3/8" 0.05" hex socket
Vision ribbon screw 2-56 x 1/8" button head, 0.05" hex socket
Body air transfer port screws (4) 4-40 x 3/32" 0.05" hex socket
Vertical adapter screw 1/4-28 x 1/2" socket head, 3/16" hex socket
Manifold/body screws (2) 4-40 x 1/4" button head, 1/16" hex socket
Solenoid/manifold spacer screws, current (2) ? x ? speciality high-profile socket head, 1/16" hex socket
Solenoid/manifold spacer screws, old (2) ? x ? 1/8" external socket hex
Circuit board lock screws (2) 2-56 x 1/8" socket head, 5/64" hex socket
Note: The old manifold screws and attaching circuit board lock screws are no longer used.
Solenoid insert chamber threads 1/4-28
I think the only thing I haven't told you is all the o-ring sizes and where they go.
Also the bolt you get may not go with the body as the cut outs vary through the different bodys.
There are also 2 types of solenoid, parker, which has the upper board attached through solder and humphrey which has a male-female board connection and can be removed by sliding it off.
You will also need 1/2 board pins depending if you want one or two, lol, a power actuator and a pin to hold the actuator in if it isn't already on the frame.
Anything else?
Oh thats a point, pick some beer up when you come or I will be forced to miss things, things that no-one will be able to fix on sunday
but back to the thread.
Feedneck (old SP thread)
Body
Left solenoid insert
Right solenoid insert
Bolt guide
Bolt sleeve
Bolt
Firing can
Eye ribbon
Eye plate
Vision detent
Non-vision detent
Manifold plate
Solenoid
Upper board
Wiring Harness
Lower board
Frame
Trigger
Rail ASA combo
FRM (front reg mount/Vertical ASA whatever they feel like calling it)
Regulator
Barrel (threads depend on the body you choose, they are either shocker or cocker threaded)
Screws.
Shocker SFT:
Description: Screw thread: Screw type:
Grip panel screws (4) 6-32 x 5/16" button head, phillips
Frame/body screws (2) 10-32 x 11/16" button head, 1/8" hex socket
PL frame, rear body screw 10-32 x 1/2" socket head, 5/32" hex socket
Note: "PL frames" include the 06 Dynasty, Dark, and Tonton frames.
Trigger return magnet set screw 1/4-28 x 1/4" 1/8" hex socket
Stock trigger pre-travel set screw 4-48 x 3/8" 0.05" hex socket
Stock trigger post-travel set screw 4-48 x 1/4" 0.05" hex socket
Stock trigger firing point set screw 4-48 x 3/8" 0.05" hex socket
Vision ribbon screw 2-56 x 1/8" button head, 0.05" hex socket
Body air transfer port screws (4) 4-40 x 3/32" 0.05" hex socket
Vertical adapter screw 1/4-28 x 1/2" socket head, 3/16" hex socket
Manifold/body screws (2) 4-40 x 1/4" button head, 1/16" hex socket
Solenoid/manifold spacer screws, current (2) ? x ? speciality high-profile socket head, 1/16" hex socket
Solenoid/manifold spacer screws, old (2) ? x ? 1/8" external socket hex
Circuit board lock screws (2) 2-56 x 1/8" socket head, 5/64" hex socket
Note: The old manifold screws and attaching circuit board lock screws are no longer used.
Solenoid insert chamber threads 1/4-28
I think the only thing I haven't told you is all the o-ring sizes and where they go.
Also the bolt you get may not go with the body as the cut outs vary through the different bodys.
There are also 2 types of solenoid, parker, which has the upper board attached through solder and humphrey which has a male-female board connection and can be removed by sliding it off.
You will also need 1/2 board pins depending if you want one or two, lol, a power actuator and a pin to hold the actuator in if it isn't already on the frame.
Anything else?
...not very comprehensive now is it?
