regulator on vibe and sp-1

[Ali]

not a clue but it will have better consistancy, better on the gun and more shots i think.

 

[Dskize]

I just go by the bump from SP, never had experience using or teching them, they don't seem to be breaking

It's a great little gun for what is is ,I would and have played with one in the woods myself,it just did what pretty much what every other electro would do when used with C02,it froze up,put it back on air and it ran sweet again.

Please don't tell me you wax verbatim from the manufacturer Balfy.

 

[balf]

It's a great little gun for what is is ,I would and have played with one in the woods myself,it just did what pretty much what every other electro would do when used with C02,it froze up,put it back on air and it ran sweet again.

Please don't tell me you wax verbatim from the manufacturer Balfy.

I just haven't had one that needed fixing yet, i think the reg design is awesome with the PRV, makes it very hard to over-pressurise it.

When I see one with trouble i'll pass judgement but as of now nothing, not a sniff, it is however entirely possible that folk with them just use air so a problem on CO2 would be hard to come by


edit - while I've got my thinking cap on, there are 2 dwell settings, setting 1 is for CO2 setting 2 is for air.

To change it, unclip the battery, hold down thge power button whilst re-connecting the battery, one flash is the CO2 setting, 2 flashes is air

 

[Aza0193]

not a clue but it will have better consistancy, better on the gun and more shots i think.

cant go wrong the really and considering air is more available and you pick up a tank for £40

 

[Dskize]

I just haven't had one that needed fixing yet, i think the reg design is awesome with the PRV, makes it very hard to over-pressurise it.

When I see one with trouble i'll pass judgement but as of now nothing, not a sniff, it is however entirely possible that folk with them just use air so a problem on CO2 would be hard to come by


edit - while I've got my thinking cap on, there are 2 dwell settings, setting 1 is for CO2 setting 2 is for air.

To change it, unclip the battery, hold down thge power button whilst re-connecting the battery, one flash is the CO2 setting, 2 flashes is air

Yeh I found that bit in the manual...However it was the only bit I actually believed

 

[balf]

What they finally put it in there!

The one's I had at the tech course where missing it, oddly enough they wern't a first run or anything, the vibe and sp-1 had been around a few months.

 

[Dskize]

Smart part's have a tech course for a SP1 ..Wow.

Loyalty is good..denial is bad.

And of course when I say manual I mean A4 sheet done on a library photocopier.

 

[balf]

It was a course for all the new gats, from the NXT onwards, yeah, i think all the new manuals are that same sheet with the name tippexed out and the new name biro'd on, they even have the same box for the NXT as they do for the SFT