New Dye Boards

[J@mes]

LOL

trigger sen.- 5
Dwell- 18
ROF- 20, but its needs to be 3 for new 12bps (unless they have changed that too)
firing mode- 1- NPPL Semi
2- PSP
3- Mill mode
-James

 

[lemonadeX]

Covered above ^

 

[Stokecity_m]

LOL

trigger sen.- 5
Dwell- 18
ROF- 20, but its needs to be 3 for new 12bps (unless they have changed that too)
firing mode- 1- NPPL Semi
2- PSP
3- Mill mode
-James

so ignore the colours - as the manual is now wrong, but this is the order they are in so ,

trigger sen = green
Dwell = blue
ROF = red
firing mode = aqua blue.

is this correct?

if so , why did dye decide to change the colours?

 

[J@mes]

so ignore the colours - as the manual is now wrong, but this is the order they are in so ,

trigger sen = green
Dwell = blue
ROF = red
firing mode = aqua blue.

is this correct?

if so , why did dye decide to change the colours?

From what Will has said, yeah seems to be.

No idea mate, all i can think is, the yellow was hard to see in the sun.

-James

 

[Stokecity_m]

cheers guys

 

[Ash - GI Sportz]

Hi

Just to clear this all up. We had to re-flash some old boards at Malaga, as our new boards didnt arrive until late on the first day. The reason you have a different light sequence is due to there being a different LED on the new board. So when the new program was put on there, with the old LED, the light codes were not identical. Hence the colour changes.

The menu sequence is still the same.
So it still goes
-debounce
-dwell
-Max RoF
-Fire mode

When you enter the settings menu, you will always start at debounce, and when you change a setting, the menu will revert back to debounce. So you can always work out where you are.

Hope that clears up some confusion.

Ash