now that i dont believe. Even if it was shooting at that speed youd need to use spec ops paint for it not to get smashed to bits
Recommend a mech?
- Thread starter Paris
- Start date
Nope we had a few go dodgy at the site, the sear spring isn't strong enough to hold the hammer back so it just keeps cycling, whacked a halo on there and no chops, acts the same as if it is low on gas, but cycles fully!!!
amazing! so the n00bs arent wrong when they all say "OMG its on full auto!!!1" after hearing one fart on low gas.
Autococker would be the obvious choice but they can be a little complex if they go wrong.
Tippmans prolly the best bet price wise and you can fell a tree with them and they'll still work...
Tippmans prolly the best bet price wise and you can fell a tree with them and they'll still work
...
pick up a nice Trilogy or another mech cocker, if you know what your doing there easy enough to fix, id know ive fixed mine enough
totally agree with the euromag comment, they really are just as quick as just about any electric marker
have a look at te sp-1 or the vibe, can run on Co2 as well and can get 11bps outa it ... seems like a good idea, or maybe a mag or a cocker depending on your budget
Hey Balf, long time no see
As well as the sear spring it can be the trigger on the Inferno that causes it to run in 'full auto' - the corner of the trigger (looking from the rear) gets a bit rounded where it rests on top of the safety catch. Put the safety on, hold the trigger in and the sear is dropped just enough to let the hammer go. Then it slips back off the sear again each time it returns, all the time the trigger is held in. I would agree 15 is entirely possible
Ok all you Inferno users...go to the toolbox and fetch a file