S-Rail screws....Help please.

[lil wenlock]

Right guys, brought a Shocker and it has an Smart parts rail to mount the max flo on. But the setup is too long for be as it is and the screws to fit the rail to the grip frame are rounded off. Any ideas how i can solve this problem?

Thanks,

Jord

 

[Tom Allen]

can you post up a pic

 

[balf]

take a smaal hacksaw and cut a slot into the screw head, remove with screwdriver.

If i remember rightly, bit too thin for the centre punch technique Tom

 

[Tom Allen]

take a smaal hacksaw and cut a slot into the screw head, remove with screwdriver.

If i remember rightly, bit too thin for the centre punch technique Tom

i have many ways to deal with such problems

 

[lil wenlock]

take a smaal hacksaw and cut a slot into the screw head, remove with screwdriver.

If i remember rightly, bit too thin for the centre punch technique Tom

Doing it now mate, will post up how it goes.

Cheers for the help.

 

[thebigt]

i had this problem with my old shocker frame. all i did was drill the screwheads off to remove the rail then used a pair of pliers to grip the stumps of the remaing screws and then unscrew then.

 

[seany boy]

I used a hacksaw on mine.

 

[thebigt]

I used a hacksaw on mine.

that works too but if you cut it too short your screwed

 

[Dark Stranger]

S Rails blow in a big way.

Much better quality rails about.

 

[seany boy]

that works too but if you cut it too short your screwed

Cut what too short? I did the method balf used with a hacksaw.