Halo b, Flashing?

[Aphex]

Hey one for any Halo owners out there.

Ive got a Halo B with ripdrive and a speedfeed,

when i go to turn it on with a full hopper of paint it will feed about 4 balls, then the LED with flash green and red, Turn it of and on, same.

the only thing that will fix it is if i fill the hopper up then tilt the balls away from the feeder and slowly tilt it back to nomal,

Anyone got any ideas whats up?

I thought it maybe low batties, but im not sure.

Cheers
FIXEd, CHECk THe LASt POSt FOr THe ANSWEr

 

[Cliff-In2Deep]

Batteries or eyes...Or both...

 

[Aphex]

Batteries or eyes...Or both...

i dont think its the eyes, because as long as it tilted 1st they feed fine, plus it doesnt feed if i block the eyes.

but i could be wrong.

Cheers for the reply.

ill have to get myself new batties from somewhere

 

[Oily]

http://www.haloloader.com/_site06/pdf/manual_halob.pdf

 

[Creepy]

I found mine did the same if i over filled it.... So don't over fill it

I believe it puts a bit too much preasure on the feed cone & it jams up, don't quote me though

 

[PBNinja101]

its a jam, make sure you're paintballs dont have a dark shell as this sometimes will cause problems with the eyes, also try and fill you're hopper just over 3/4 full - i never used to fill much over this.

 

[Leezo]

I personally havent had any problems filling it right up. It could be the batteries, cos my lights where doing the same and got away with changing the batteries

 

[Hoodless ECI]

Spring under the cone aligned correctly?

 

[NitroBall]

possibly your eyes are loose in the raceway ? Are the eyes inserted correctly, taped up nice and tight ?
The small part which sits and screws on top of the raceway where it holds the eyes in place, is that loose ?

 

[Aphex]

ok i finaly got round to taking my halo apart to day,

checked the eyes they seem fine as does the Spring under the cone

i tryed a few things and it seems that the halo will feed fine continuously but when there is a ball in the gun it trys to carry on feeding, there is about 3 weird noises that sound llike the cone trying to turn and failing then it starts to flash

i think the eyes are dead?

could someone help me out,

Thanks

Tom