inserts .. help needed

[trakkerboy]

hi guys / girls ,just bought an epiphany and they have freak jr barrels and it came with a green insert and just wondering if any paint will work fine through it , as i have only ever used stock barrels

cheers
James

 

[dust4dust]

green is 0.695 biiger then most stock barrels(0.693)

 

[trakkerboy]

ok erm.. I use draxxus midnight , will that be ok ?

James

 

[SAMUEL.D.RYAN]

if they're .695 calibre balls or lower, you should be fine, just put one through the insert to check

 

[Carlos.]

Get the insert in one hand and a few paintballs in the other, try and feed them through the insert and if they go through ok it'll be fine. whichever insert best matches the paint is the one to use.

Hope this helps

Carlos..

 

[dust4dust]

which stock barrel were u using before, once u know size of that (i guess at .693) then u know for sure that all paint u shot before will still shoot

ps i could be wrong here but i know of no barrels bigger than .695

 

[CAMDENELECTRIC]

To make sure you get a tight fit the paintball should be able to stick in the insert and not roll out on its own. Blow the paintball out to make sure that it is not too tight otherwise you will just get barrel break after barrel break.

 

[J@mes]

the ball should have three points of contact for a good fit, it's best to oversize, than under size.

-james

 

[Stencil]

the ball should have three points of contact for a good fit, it's best to oversize, than under size.

-james

QFT. This way the ball won't spin.

 

[dust4dust]

from how i read his post he has green(.95) insert only