angel 1 + pmi hp bottle = ?? :)

[Tom Allen]

I used hp on my A1 with no probs at all.

 

[Tom Allen]

from the speed 04 up to the g7 they went lp, and both for the A1.

 

[evoonline]

cheers tom. much help m8. i might be shouting you up with a broken a1 soon "help tom, i put my pmi hp air bottle on my angel and it went boom!"

nah only messing but cheers for the help

 

[Nickeroo]

I've been running a hp bottle on my a1 since i got it, not had any problems whatsoever relating to the use of it. Though it is a dxs air system and to my knowledge output on them is about 700/750

 

[L.i.P.S]

so i still dunt know how to check the actual output of my pmi bottle. would it be printed on the side or do i need to buy some kinda gauge to do this? im still looking into getting an a1 but im unsure about buying if i have to change my air system out :S

/QUOTE]

its simple to check the output all you need is a on /off bottom line and a 0-1000psi gauge.With the gauge on the output port of the asa just engage your bottle and it will tell you the output.

We have had no problems running A1s with air systems from 450psi - 800psi but some do creep which can cause problems.

If you are unsure then any tech should have the gauge made up and will test it for you.

We have sold the CP front adaptors since they came out and we retail them at 19.50 inc postage.

If you are are unsure of anything then drop us a line on jon@lipspaintball.com or fraser@wdp.tv

all the best

 

[L.i.P.S]

also forgot to add that you could just get a low pressure kit for the pmi reg,about a tenner. job done.

 

[evoonline]

cheers jon.

 

[Dark Warrior]

also forgot to add that you could just get a low pressure kit for the pmi reg,about a tenner. job done.

Then pay a tenner for someone sensible to fit it