do the triggers on the new angels which you can buy fit on a ingel ir3 need to know please dextrus
angel ir3
- Thread starter dextrus
- Start date
nope, its only ir3/04 speed ( i think) triggers that fit. you can pick them up on ebay.com quite cheaply
With a bit of modding to the trigger you can fit a CP roller trigger for a DMdo the triggers on the new angels which you can buy fit on a ingel ir3 need to know please dextrus
Not actually done it as I only tried the trigger out of my Trix into the IR3 frame. The trigger is a bit thinner which can be shimmed up with some aluminium tape from a hardware store and where the part of the trigger that strokes the switch, you can roughen the end and put either use a blob of liquid metal or arildite resin shaped to size.
This way you can still sweet spot the trigger with the adjusters at the front of the trigger and inside the trigger top like the original one.
ah ok, may have to give that a go at some point, if you ever get round to doing it drop me a pm with some pics or something
thanks for the description
Nick
thanks for the description
Nick
I read something on another site some where about some kind of frankin trigger I'm going to have a look nowah ok, may have to give that a go at some point, if you ever get round to doing it drop me a pm with some pics or something
thanks for the description
Nick
http://stores.ebay.co.uk/Squash-Goblin_Paintball-WDP-Angel-Parts_W0QQcolZ4QQdirZ1QQfsubZ6636862QQftidZ2QQtZkm
They do the chain, jagged and scorpion triggers. Pretty sure those are the old IR3 style ones. Dead cheap too.
They do the chain, jagged and scorpion triggers. Pretty sure those are the old IR3 style ones. Dead cheap too.
thanks for the link, i have had a look at them however i think they are lcd triggers, the adjusters arn't in the same place and the back bit that activates the switch looks to be on a slight angle, not at 90'.
i remember seeing some ir3 triggers on ebay.com, old fbm ones, think they cost about £25-£30 inc postage to get em here.
I had a good look at the pictures just , and your right. The trigger pull stop screw is above the board switch on the IR3 original trigger, and the stop is the other side of the trigger rest adjuster on the eBay ones.
Not sure if they will work the same, but I'm fairly certain that they will fit. I think that they moved the stop from one end to the other so you dont have to take the frame of to adjust the pull and only open the grip to access the screw if you know what I mean...