Halo B2 Help......

[Jimmy_Bob]

Hi

Took my new Halo B2 out on sunday, new batteries, decent paint.... but all the bloody thing done all day was jam up.... any idea why this might be?

Also, has anyone had any experience in programming them?

Thanks for any help...

James

 

[lemonadeX]

I don't think there is a Halo B2. There is a Halo (with eyes) and a Reloader B2 (sound activated). Post up which one it is to help with diagnosing the problem

If it is a Halo, make sure the eyes are clean, working and connected to the board correctly. Also install fresh batteries to eliminate that as the cause.

-Will

 

[Jimmy_Bob]

Its a Halo Empire B2 Reloader..... its running with a DM7, it picks up the marker firing, but every 100 or so shots it jams up.....

Cheers

 

[Dark Stranger]

Its a Halo Empire B2 Reloader..... its running with a DM7, it picks up the marker firing, but every 100 or so shots it jams up.....

Cheers

Does it have a spring and a set of beads in the raceway of the loader?

Have you tried a new set of good quality batteries?

Is there loads of old paint / crap in the raceway and around / under the drive cone?

If you are using a quiet marker such as a DM7 you will need to cank up the sensitivity of the loader as it will struggle to pick up each cycle of the marker.

 

[Jimmy_Bob]

It doesnt seem to have a problem picking up the marker, that was my next question how to programme it... and yes I have read the instructions but it doesnt seem to work.... any one else had this problem?

Yes it does have the spring and the the beads, the loaders brand new no crap in the way, batteries were brand new good quality that day....

 

[PSG]

Could be the board mine kept turning itself off, got a new board no problems
hope this helps