halo b trouble?!?!

[t_doherty69]

I've recently bought a halo b in reloader b shells, but when i turn it on the feeder just keeps spinning!
i'm guessing its just the eyes that may need replacing but before i buy them just wanted make sure it is the eyes.

cheers

Tim

 

[KitsuneAndy]

I've recently bought a halo b in reloader b shells, but when i turn it on the feeder just keeps spinning!
i'm guessing its just the eyes that may need replacing but before i buy them just wanted make sure it is the eyes.

cheers

Tim

Is this when it has paint in? or empty?

Because if it had paint in, I wouldnt expect it to keep spinning, even if the eyes were working, it'd just jam itself.

 

[t_doherty69]

Is this when it has paint in? or empty?

Because if it had paint in, I wouldnt expect it to keep spinning, even if the eyes were working, it'd just jam itself.

does it both with and without paint in,

does jam up when the balls are fed but is breaking balls under the pressure

 

[KitsuneAndy]

does it both with and without paint in,

does jam up when the balls are fed but is breaking balls under the pressure

Definitely sounds like your eyes then.

I know my question was stupid, but you never know with people on here, sorry

 

[t_doherty69]

Definitely sounds like your eyes then.

I know my question was stupid, but you never know with people on here, sorry

no probs mate,
cheers for the help i'll get shopping tomorrow then

 

[KitsuneAndy]

no probs mate,
cheers for the help i'll get shopping tomorrow then

Take the thing apart and check all the connections etc before buying new ones mate, they might not need replacing.

 

[Stokecity_m]

you should make the person who sold it you as " in good working order " pay for the new eyes

 

[zipatronic]

if the eyes were dirty it wouldnt spin at all because it would think there is paint in the feed neck. ( i had this prob with 1 i bought and thought it was knackered!)
might it be that the wires have gotten pinched and broken?
have you checked the wires at all??

might be best to try another set of eyes in it or even try your eyes on a known to be working halo before lashing out on another set.
may even be that the board is knackered.
just a thought for you...

 

[Dark Stranger]

You often get a bit of dirt in the eye recesses in the loaders feed neck. Clean them up and you should be good to go.

 

[Big Mac]

is it on your marker - if its not its gonna keep shelling the paint out - or if you dont have detents or they are severly worn i guess it will just keep churning them out.