Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

ION Question

ashrules

Active Member
Nov 3, 2006
43
23
28
London
right i have lost the manual for my ion......and i need to get it on semi mode so it one pull one paintball...no ramp or bounce..

i know its the lights on the board...but tried them all and it seems to do exactly the same and ramp...


can any one just tell us wat colour light flashes and how it flashes on the board for semi..?? so i can change mine


cheers
 

RainbowShooter

Drop the gun, fat boy.
Oct 12, 2006
3,450
14
63
St Albans, Hertfordshire
right i have lost the manual for my ion......and i need to get it on semi mode so it one pull one paintball...no ramp or bounce..

i know its the lights on the board...but tried them all and it seems to do exactly the same and ramp...


can any one just tell us wat colour light flashes and how it flashes on the board for semi..?? so i can change mine


cheers
Bounce is not a mode on the board, its your trigger set up etc.
 

Marcus Geezer

Platinum Member
Not rocket science

It aint rocket science to setup an Ion.

Confirm which board you have installed, know your goal within the limitations of the installed board, then use the relevant manual or the online help to do it.

Easy peasy lemon squeezy.

Your profile says you are a designer of some sort so you should be able to work it out yourself!
 

Friswell_69

Platinum Member
Dec 13, 2006
588
1
43
blackburn
if its the stock board all you need to do is open up the grips press the little grey button, and keep pressing it untill you get to double blinking red then press the power button and if you have the uk board then pressing that once will set you to semi

so you know for next time:
double blink yellow = mode up
double blink red = mode down

and the modes are as follows
0 = semi
1 = ramping
2 = 3 shot burst
3 = full auto

(but not uk boards dont have 3 shot birst and full auto )