ICD Promaster,

[M1ke]

Lol never worked since i got it, ill try uping the pressure will get the allan keys out in a min, i didnt get spares apart from like 2 orings, 2 like fat silicon orings, a tank oring it looks like, a plastic circle and 1 ball detent, I rember it was 0-10 i think that was on the manual but ill check in a min,

Cheers

You don't use an allen key. To up the pressure, you need to use the small plastic disk you got with it (or a 10p if you don't have one) and screw in (or out, I can't remember off hand which) the front of the lpr (under the barrel). This will up the pressure inside the marker and force the ram and bolt back to where they should be.

 

[jimbo2004]

why i think its a oring ,

but all other problems were before this..

 

[jimbo2004]

You don't use an allen key. To up the pressure, you need to use the small plastic disk you got with it (or a 10p if you don't have one) and screw in (or out, I can't remember off hand which) the front of the lpr (under the barrel). This will up the pressure inside the marker and force the ram and bolt back to where they should be.

ooo i see ill turn it inwards

 

[M1ke]

ooo i see ill turn it inwards

Any luck?

 

[jimbo2004]

Any luck?

just replacing an oring was the right one , and then ill do what u said jus screwing it back together

 

[jimbo2004]

Right oring fixed the leak, but bolt flies back :| and does nothgin still and is very stiff and board stoped working again

 

[jimbo2004]

Getting somewhere something to do with the lpr, its all aired up board working, i really loosened the lpr bolt stayed in its non aired up position with air in, as I turned lpr inwards bolt went backwards.. and didn't move after

 

[jimbo2004]

YAY fixed it ^ ^

 

[M1ke]

but bolt flies back

Flies back where? Is it now in the correct place when gassed up (i.e. at the back allowing a ball to fall into the breach?

and board stoped working again

In what way? Marker won't turn on? Take the grip frame off again and check that none of the connections into the board are loose. I've seen the power one (from the battery) come loose before when people have put a battery in.

 

[M1ke]

YAY fixed it ^ ^

Congrats.

If you want to upgrade the code on it, PM Rabbies on these forums. I'm sure he'd be able to sort you out with a flash for the custom Tiger code. Not sure what the rates are for this, but it will be reasonable, and well worth doing.