Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

ion fps

YourMUM

1 4 all and all 4 1
Feb 25, 2005
315
0
0
devon
gilboys.co.uk
The Sp Ion reg is 1 of the best on the market
Need 2 to 3 000 balls to get it going. and you nee to strip it like Lump says and thet is a complete strip Bud ok




Sounds like the dwell and ROF are all mixed up


DONT have the dwell as low as you can det it and the same With the ROF. you need a good balance ok.

15.4 bps in uk so you have a tone of adjustment



also you need a good barrel stock is good but you need a good paint to bore match


My Ion hits + _ 3 fps ALL THE TIME
 

Oily

Big kid
Jul 30, 2006
445
5
28
Radcliffe,Manchester
Try this:
1. Bottom out the dwell
2. Set your input pressure to about 120 psi
3. Increase the dwell until the marker cycles properly at +/- 10 fps consistency
4. Increase your input pressure up to desired fps
5. Increase the dwell up by 1 until velocity stays consistent. If consistency is already good. reduce the dwell down by 1 until it becomes inconsistent, then bring back up 2.

Should be around 20 blinks +/- for the Smart Parts QEV
 

YourMUM

1 4 all and all 4 1
Feb 25, 2005
315
0
0
devon
gilboys.co.uk
Try this:
1. Bottom out the dwell
2. Set your input pressure to about 120 psi
3. Increase the dwell until the marker cycles properly at +/- 10 fps consistency
4. Increase your input pressure up to desired fps
5. Increase the dwell up by 1 until velocity stays consistent. If consistency is already good. reduce the dwell down by 1 until it becomes inconsistent, then bring back up 2.

Should be around 20 blinks +/- for the Smart Parts QEV

WAY TO DO IT DUDE


:p
 

Tim.a.p.havoc

New Member
Dec 3, 2006
145
0
0
is it just my ion or is it the norm when i put my marker over the chrono it +/- 10-20 fps is there anything i can do to make it more consistant i have a blackheart board and firebolt fitted would either of these be causing the problem
bring it round mine and let me have a fiddle with it