15 Bps Cap Dm6 Board
can any 1 tell me how to cap a standerd Dm6 board thanks very much plz guys i really need this help
can any 1 tell me how to cap a standerd Dm6 board thanks very much plz guys i really need this help
Cap Dm6 Board
- Thread starter XV8
- Start date
You can't cap the rate of fire with eyes on in Semi mode, on the stock board, only with eyes off.
- Open up the right hand side of the grip
- Flick both Dip Switches UP
- Turn on the marker
- Pull the trigger and watch the colour's change
- Once it get's to orange STOP
- Pull and hold the trigger
- The Board will then flash LED's at you, The number of time's it flashes is the corresponding mode you will be on.
- You need to be on mode 1 to be 15 bps legal.
- Once the Board has flashed at you it's current mode.
- Pull and release the trigger Once
- Once pulled wait for a second or two, it will then start flashing all pretty colours.
- FLICK DIP SWITCH 2 BACK DOWN
- ( dip 1 stays up )
- Turn the marker off.
You have now changed modes to make it tourny legal
...enjoy
Balloon #12
- Flick both Dip Switches UP
- Turn on the marker
- Pull the trigger and watch the colour's change
- Once it get's to orange STOP
- Pull and hold the trigger
- The Board will then flash LED's at you, The number of time's it flashes is the corresponding mode you will be on.
- You need to be on mode 1 to be 15 bps legal.
- Once the Board has flashed at you it's current mode.
- Pull and release the trigger Once
- Once pulled wait for a second or two, it will then start flashing all pretty colours.
- FLICK DIP SWITCH 2 BACK DOWN
- ( dip 1 stays up )
- Turn the marker off.
You have now changed modes to make it tourny legal
...enjoy
Balloon #12
On the stock board in Mode 1 (Semi/Nppl)(Default setting) You can only set the rate of fire with the eyes off, as stated in the manual. With the eyes on, it will default to 20 bps. I have had this conversation with Jeff Abbot at Dye when I recieved my DM6 earlier this year.- Open up the right hand side of the grip
- Flick both Dip Switches UP
- Turn on the marker
- Pull the trigger and watch the colour's change
- Once it get's to orange STOP
- Pull and hold the trigger
- The Board will then flash LED's at you, The number of time's it flashes is the corresponding mode you will be on.
- You need to be on mode 1 to be 15 bps legal.
- Once the Board has flashed at you it's current mode.
- Pull and release the trigger Once
- Once pulled wait for a second or two, it will then start flashing all pretty colours.
- FLICK DIP SWITCH 2 BACK DOWN
- ( dip 1 stays up )
- Turn the marker off.
You have now changed modes to make it tourny legal
...enjoy
Balloon #12
As for Millenium and PSP, I believe that it is programmed to cap the ROF at approx. 15bps, but not in Semi.