Angel LCD

[smudge1989]

Ive just bought an angel lcd and fitted my max flo to it, just wondering what pressure i need to set my max flo to as when I was training the other day even with the velocity turned to the max I couldnt shoot any faster than 250fps, so whats the best psi to set my reg at?

Cheers

Smudge

 

[KitsuneAndy]

Ive just bought an angel lcd and fitted my max flo to it, just wondering what pressure i need to set my max flo to as when I was training the other day even with the velocity turned to the max I couldnt shoot any faster than 250fps, so whats the best psi to set my reg at?

Cheers

Smudge

About 600psi I believe.

 

[rayko]

Set the input of your max-flo to 800PSI and dial your minireg all the way out, then start chrono'ing from there.

If you don't get anywhere with it, it might be worth getting it serviced. The ram might be worn out and LPR (the one internal to the marker) might need shimming.

Manuals are here: http://www.wdp.tv/manuals/

 

[smudge1989]

and just out of interest what about the dwell

 

[rayko]

Give the manual a once over mate, its all there.

 

[KitsuneAndy]

Set the input of your max-flo to 800PSI and dial your minireg all the way out, then start chrono'ing from there.

If you don't get anywhere with it, it might be worth getting it serviced. The ram might be worn out and LPR (the one internal to the marker) might need shimming.

Manuals are here: http://www.wdp.tv/manuals/

problems with the exhaust valve could also lead to low fps as well i beleive.

 

[John C]

Input to the minireg: at least 650
Output from the minireg: 500
Dwell: 14
LPR 85psi


This should give you around 300 fps, if its lower then your gun has problems.

 

[smudge1989]

LPR 85psi

Theres my problem, only 3 shims on anyone got any spares kicking around?