Ego Trigger problems
- Thread starter Dicorpo
- Start date
a bit more in depth for you.
Undo your grips and unplug the leads. Undo the two screws holding the grip frame to the marker body. There is a small screw holding the pin in place which you need to undo. Dont lose the screw. Pop the pin out and clean it up. Oil the pin lightly and put the trigger and pin back together, check its moving freely and then put everything back together again.
m.
Undo your grips and unplug the leads. Undo the two screws holding the grip frame to the marker body. There is a small screw holding the pin in place which you need to undo. Dont lose the screw. Pop the pin out and clean it up. Oil the pin lightly and put the trigger and pin back together, check its moving freely and then put everything back together again.
m.
It's that, due to the design of the ego, you get grit, paint, water, everything in there. So it's sticking.
Take out the trigger pin and sand down the pin. Clean the pin holding holes out. Then replace. Leave the pin dry.
Trigger will be lovely again.
You will have to do this again.
Makes sure you set the triggers magnet isnt to strong also.
Enjoy.
p.s If you want to get around this problem and never have to clean it again. But a pm6 from www.paintballwarehouse.co.uk
Dont listen to Andy.
He dont know a lot, apart from how to do his hair!
I have had my EGO's for a year and I have never had this problem, nor has anyone in my team, so its not a design flaw.
Nige
He dont know a lot, apart from how to do his hair!
I have had my EGO's for a year and I have never had this problem, nor has anyone in my team, so its not a design flaw.
Nige
yea the design flaw.
shame the ego doesnt have the "magically repel ball from hitting you in the trigger guard" skill mod from stock...
also ben if you havent fixed it yet ill be down next weekend and can do it then
shame the ego doesnt have the "magically repel ball from hitting you in the trigger guard" skill mod from stock...
also ben if you havent fixed it yet ill be down next weekend and can do it then
Does the 06 use stainless pins or do they have plated steal like 05's and eblades?
The one in my 05 ego and eblade both rusted causing a sticky trigger/missed pulls.
The one in my 05 ego and eblade both rusted causing a sticky trigger/missed pulls.
Check that the magnets arent fooookd...
May sounds stupid but thats what was wrong with mine. I bought a new trigger and all was fixed.
May sounds stupid but thats what was wrong with mine. I bought a new trigger and all was fixed.
there arent any magnets in the actual trigger...
i can practiucally guarantee its a bit of crap in the trigger guard.
dont listen to eastie he hasnt a clue hes more interested in spending his time in the welsh countryside