Speed 06 and HP air?
- Thread starter lukesteele
- Start date
Pump 800psi into a gun set up to accept 450psi
Therefore expect a few blown seals for starters
Would you put a 3000psi reg on a 4500psi bottle *NO
Then don't pump 800psi into a 450psi marker
unless you are willing to at minimum fund the repair bill
at worst suffer some form of physical injury
Compressed Air is dangerous - At all costs BE SAFE
Running HP on the speed 06 , G7, G7 flys is possible if the mini reg mod is done correctly.
some Angel owners on AOG have used HP in there LP Angels, but are finding it hard to get the velocity down below 300 FPS.
I have heard rumours , not fact ,that long term using HP on a LP Angel will wear internals very quickly.
These markers were made to use LP, advise is to stick with LP air.
some Angel owners on AOG have used HP in there LP Angels, but are finding it hard to get the velocity down below 300 FPS.
I have heard rumours , not fact ,that long term using HP on a LP Angel will wear internals very quickly.
These markers were made to use LP, advise is to stick with LP air.
I used to run a hp reg on my speed 05 , aslong as you set the gun up , so its not taking in the whole 850 psi works fine , I never had any problems with it.