ICD thread feednecks...where?

[MattN]

Had no luck trying to find a clamping feedneck, could someone point me in the right direction.

Cheers

 

[Robin Hood]

Impulse and shocker feednecks should work.

There's a long post in the ICD forum on PbNation about the minute difference between them in technical detail if your interested, but the bottome line is the impulse and shocker feednecks should work.

(There is a bushmaster/ICD thread available from some companies, but not all)

 

[MattN]

Cheers

 

[robof9]

as an owner of 3 bushy's, well peices of 3 bushy's. i can tell you qloc works well, just be carefull putting on.

 

[stark]

Yeah, the difference is about 1 thread per inch. AFAIK Impulse is less

 

[DANIEL]

people on my team with promasters have put qloks on them from NPS.

 

[manike]

Impulse and shocker feednecks should work.

There's a long post in the ICD forum on PbNation about the minute difference between them in technical detail if your interested, but the bottome line is the impulse and shocker feednecks should work.

(There is a bushmaster/ICD thread available from some companies, but not all)

Correctamundo.

It's actually supposed to be the same thread, but the two companies spec it differently.

 

[robof9]

Correctamundo.

It's actually supposed to be the same thread, but the two companies spec it differently.

well i had a shocker, and a bushy, the icd feedneck didnt fit the shocker but the shocker one fit the bushy go figure

 

[manike]

Different manufacturing tolerances and how they call out the specs.

It's supposed to be the same thread, but as I said, they call it out differently.