Advice.

[jim1962]

I got these in a box of bits when I bought a marker .I have looked online and found some resemblance to them but nothing 100%.Anyone recognise them .?

 

[Banil]

Planet eclipse eblade looks an Factory 1.

Bottom one is a evolution cut by belsales. Early edition.

Both are autocockers.

Very interested in the bottom of you was to sell.

 

[jim1962]

Planet eclipse eblade looks an Factory 1.

Bottom one is a evolution cut by belsales. Early edition.

Both are autocockers.

Very interested in the bottom of you was to sell.

Thanks for the info ,will keep in mind .

 

[jim1962]

These have now been sold .
Gone to a good home.

 

[Bolter]

These have now been sold .
Gone to a good home.

hope you got a really good price for the EVO as they can be worth quite a bit to the right person

 

[jim1962]

Had no idea of the price of the markers to start with ,but I was happy with what I got .
Came on for advice ,found out one of the others I picked up aswell is a AGD Lvl 7 Auto and looking at trying to restore it .Not something I have done before ,but after reading up on it ,it has my attention.

 

[jim1962]

Were is the best place to start ?.
mechanically I’m fine ,were on the site is it best to post to get feedback and look for parts ?.

 

[Dusty]

Here is a good start, I'd say if you search facebook you'll find a few owners groups who may be able to steer you in the right direction.

 

[jim1962]

Ok thanks .

 

[k4p84]

In all honesty it's a mag, if you took it apart, cleaned it and generously oiled it it would probably work. Worst case you need a rebuild kit but you would need to buy from AGD in the States, there are no stockists over here.
You don't need the expansion bottle if your running air rather than co2 ans if you need a barrel as none where pictured let me know I have 30 odd of them